★★★★★
Average rating on the App Store. Apple doesn't publish how many ratings each star has.
Where this app stands in Czech Republic, updated 18 Nov 2026
Top free
Not in this chart today
Top paid · All apps and games
#43 –
The daily graph appears once there are at least two days of data for this country.
Best rank in each country today. Click a country to see its graph.
Bench mode: read a removed battery pack through its X098 connector. In Settings → General (advanced section) turn on "Bench: acknowledge frames" — the adapter then acknowledges CAN frames, so a pack outside the car keeps broadcasting cell voltages, SOC, energy and isolation data. Keep it off in the car. Minor fixes.
T-CAN reads the internal CAN bus of a Tesla through an OBD-II adapter or a CANserver / S3XY Commander and shows what the car itself sees: battery and cell voltages, temperatures, motor power and torque, charging data and the raw frames behind them. Key readings are not just taken from community DBC files: battery SOH and energy, cell voltages and temperatures, charge port state, HV bus voltage, speed, pedal and torque are cross-checked against the car's own diagnostic values on real Model 3 / Y with current firmware. Tiles marked ⓘ tell you exactly which signal they show. Dashboards: • Battery pack: voltage, current, state of charge, nominal and remaining energy • Cells: every brick voltage, min / max, imbalance and dead-cell detection • Drive: speed, power and torque per motor, pedal, gear, drive-unit temperatures, a 0–100 / 100–200 acceleration timer and an optional synthesized engine sound • Charging: line power, voltage, charger state, charge limit • HV: contactor states and BMS state Tools: • Raw frame view with live frame rate and per-ID filters, for exploring unknown signals • Raw bus mode for any CAN car: auto-detects the protocol and streams frames without decoding • CAN logger with CSV export to the Files app (On My iPhone → T-CAN) • Dashboard snapshots as PNG or PDF, saved or shared • Car profiles for Model 3 / Y and refreshed S / X (2021+) and for legacy S / X (2012–2020); battery type is detected automatically • Demo mode with a built-in simulator, to try everything without a car • Light and dark theme, English and Ukrainian Adapters that work on iPhone: • Bluetooth LE OBD-II adapters (ELM327-compatible, Bluetooth 4.0 or newer) • MFi adapters: vLinker MS / FS and OBDLink MX+ • Wi-Fi ELM327 adapters • CANserver and S3XY Commander (Wi-Fi) Classic Bluetooth adapters made for Android do not work on iPhone. What you need: • A Tesla, one of the adapters above and an adapter cable for your car's diagnostic port • iPhone with iOS 15 or newer Privacy: the app works fully offline, has no account and collects no data. Everything it reads stays on your phone. T-CAN is an independent project and is not affiliated with, endorsed by or connected to Tesla, Inc. Decoding is based on community research (community Tesla DBC files, used under their licenses); values are indicative, may be incomplete, and may change after a vehicle software update. Use at your own risk and do not leave the adapter plugged in for long periods.