★★★★★
Average rating on the App Store. Apple doesn't publish how many ratings each star has.
This app isn't in any of our charts yet.
Safeguard Aerial Lift connects an iPhone to the Safeguard Aerial Lift Hub installed on a bucket truck. To connect for the first time, hold the phone near the Hub. After that, the app reconnects to the same Hub automatically. The Hub and sensors generate all alerts. The app is used to view sensor status and live readings, set alert levels and the alert mode, set the number of sensors, and install the firmware included with the app. SENSOR STATUS The home screen shows one icon for each configured sensor. A solid icon with a green link line means the phone has recently received a radio signal from that sensor. It does not mean hazard monitoring is active. If voltage and current readings stop, the app reports that the hazard-monitoring state and truck power are unknown. ALERT SETTINGS Voltage and current each have one alert level, which applies to all sensors. Each level is set on a scale from "Alerts sooner" to "Alerts later" and is shown as a line on the live graphs. Two alert modes are available: • Static Threshold: triggers an alert whenever the measured voltage or current exceeds the configured level. • Rising Signal Alert: triggers an alert when the measured voltage or current exceeds the configured level and is increasing. SENSOR COUNT The Hub can be set to use one, two, or three sensors. Changing this number disconnects all sensors, and they must be paired again using the Hub button. The app provides the pairing steps and the light patterns to look for. FIRMWARE UPDATES Hub and sensor firmware is included with the app. Before an update starts, the operator confirms that the equipment is parked, the boom is lowered, the truck is in a safe state, and only that truck's Safeguard system is powered in the update area. Monitoring stops while the update is in progress. DATA AND PRIVACY No Safeguard account is required. Field-test participants can allow the app to record session data, which is then uploaded to Safeguard automatically. If recording is declined, all status and configuration features work the same way. REQUIREMENTS • A Safeguard Aerial Lift system: one Hub and one to three sensors installed on the truck • Bluetooth turned on